REAKTOR 4.0
REAKTOR 4.0 developed by 3urner
Contact form Pricing and Shipping Information down below!
REAKTOR 4.0 VS. REAKTOR 3.0 ?
Probably most of you want to know what the difference between those two versions is. As the name suggests REAKTOR 4.0 is the succsessor of REAKTOR 3.0. It offers superior cooling performance, cooldown speed and temperatur control over REAKTOR 3.0
Let’s get right to business:
The cooldown from 27°C down to -196°C (fullpot) takes only 2:32 min which is 14s faster than REAKTOR 3 (2:46min). One of the craziest things is the efficiency. The complete cooldown takes only 1 liter of liquid nitrogen (with no load).
Reaktor 3.0 still looking good
Size and Compatibility:
-with most cpu sockets was one of the main goals, which we managed to achieve. The base is perfectly flat and measures 65x55mm / 75x55mm for TR. In the last production step the base gets polished, to ensure perfect smoothness. Thus the REAKTOR is compatible with:
LGA 1700, 1200/ 115X and 775
TR4 / TRX40
AM4 / AM3
LGA 2066 / 2011
-and those are by far not all! Just the most important ones.
Cooldown comparison:
Cooldown of the REAKTOR 4.0 from 27°C down to -196°C -with just 1 liter of liquid nitrogen in 2:31 minutes.
Temperature stability
During a Cinebench R20 run with an i9-13900k at 7.6GHz and 1.65Vcore load, the REAKTOR drops less than 3°C !
During the development of REAKTOR 4.0, the most important aspect for me was to further improve the temperature stability under load. In comparison to REAKTOR 3.0 the temperature drop is even more reduced. This resulted in clocking most CPUs 10-15MHz higher with REAKTOR 4.0 in comparison to REAKTOR 3.0
Temperature is measured directly at the bottom just 1.5mm above the cpu to ensure exact measurement.
Customizeable base size!
You want to bench Threadripper? No Problem! Just tell us what you wanna bench and we figure out the right base size for you! The standard base size is 65x55mm and this is large enough for X299 cpus and all mainstream cpus. If you want a larger Base TRX40 / TR4 this is no problem!
3D-printed mounting bracket
A 3d printed bracket with e.g your hwbot name on it and your logo or whatever you like is includet!
Enough space for insulation!
Here the REAKTOR is mounted on a i9-12900k. As you can see there is still plenty of space around the pot for insulation!
Pricing, Shipping and Ordering
The price is: 495 Euros without shipping.
Shipping to every country in the world is absolutely no problem! Just contact me with the form on the right and I will tell you the shipping costs.
What you will get:
The REAKTOR 4.0 copper base.
The aluminum extension.
A 3D printed bracket, with additionally your hwbot name and logo.
A backplate, threaded rods, springs and screws are not includetd This is because most of you own a Kingpin cooling Inferno backplate which has all of that already included. If you don’t own any mounting equipment, then just tell me and I will organize it for you.
Nethertheless you should really consider buying an Inferno backplate. It makes overclocking so much better, because the board won’t freeze and the memory won’t get that cold.
Now don’t hesitate to contact me with the form on the right if there are any uncertainties or general questions!
100% Made in Germany
Just as its predecessor REAKTOR 4.0 is 100% made in germany by us! In our own workshop REAKTOR 4.0 is manufacured by hand and partially by CNC.
You want to buy your REAKTOR? Any questions? Just contact me!
Famous HWBOT Submissions with REAKTOR:
-will be added soon
