REAKTOR \G

 

REAKTOR \G developed by 3urner

Contact form Pricing and Shipping Information down below!

 

Let’s get right to business:

Just as REAKTOR 3.0 this gpu ln2 pot is designed to be fast during the cooldown and to be stable during high loads. Both of this was achieved and resulted in +30MHz Core frequency in Port Royal and GPUPI v3.3. This makes REAKTOR GPU evidently the worlds best ln2 gpu pot.

 

Temperature stability

During Port Royal with a RTX 3090 at 2895MHz a load temperature of -188°C could be maintained.

With the new RTX 3000 series gpus a never seen level of power consumption during ln2 benching was introduced.

This lead all the other gpu ln2 pot’s out there to their limits. They got as warm as - 177°C during Port Royal which is just a nightmare and can not be considered “fullpot” benching.

The REAKTOR \G fixes this problem with a load temperature of -188°C during Port Royal with a RTX 3090 running at 2895MHz and pulling more than 1000 watts. This resulted in a +30MHz increase in comparison to the der8auer Raptor 4 and new Bitspower ln2 pot.

The REAKTOR was designed to work best with Kingpin cooling K-type probes because they are the most accurate ones. But other K-type probes will be fine as well. Temperature is measured directly at the bottom just 1.5mm above the cpu to ensure exact measurement.

Port Royal with a 3080TI

First test with REAKTOR \G - GPU LN2 Pot

 

Compatibility:

-with most GPUs was one of the main goals, which we managed to achieve. The base is perfectly flat an in the last production step the base gets polished, to ensure perfect smoothness. Thus the REAKTOR is compatible with:

  1. RTX 3000 / 2000 Series

  2. GTX since at least 700 Series

  3. AMD 6900XT (Other Cards need to be confirmed)

-and those are by far not all! Just the most important ones.

Pricing, Shipping and Ordering

 

The price is: 450 Euros without shipping.

Shipping to every country in the world is absolutely no problem! Just contact me with the form on the right and I will tell you the shipping costs.

What you will get:

  1. The REAKTOR \G gpu ln2 pot

  2. 4 M3 Screws with Thumbnuts

  3. A Backplate for mounting

Now don’t hesitate to contact me with the form on the right if there are any uncertainties or general questions!

You want to buy your REAKTOR? Any questions? Just contact me!

 
 

100% Made in Germany

Just as its predecessor REAKTOR \G is 100% made in germany by us! In our own workshop REAKTOR 3.0 is manufacured by hand and partially by CNC.

 
clyde-he-555k71dHQLA-unsplash.jpg